Hagesan HG impregnator sealer

1 litre - To impregnate porous terracotta tiles, brick, quarry tiles, victorian tiles, flagstones, un-glazed (porcelain or ceramic) tiles and natural stone floors and walls to protect against stains and stubborn marks.For Marble, Travertine, Terrazzo, Limestone, Sandstone we recommend HG Marble and Natural Stone Impregnator which has larger molecules and it is therefore slightly thicker to go further on very pourous materials.To check the porosity of a surface to see if treament is required use a tablespoon of water on the surface. If after 5-10 minutes none of the water has been absorbed into the surface, the surface is sealed and Impregnator is NOT required.HG Impregnating Sealer (HG Impregnator) penetrates deep into the surface and completely seals off small pores. Larger pores are made smaller meaning liquid molecules can no longer be absorbed. However any dampness in the floor can still evaporate and the surfaces can still breathe.Matt finish enhances natural colours, does not contain silicone. It is suitable for inside and outside use.The surface to be treated must be perfectly clean. HG Cement Grout Film Remover (HG Extra) cleans off cement and grout stains from new floors.HG Polish, Wax and Dirt Remover (HG Remover) strips old wax and deep cleans old floors. For really dirty floors use HG Super Remover.Apply HG Impregnator with our Superfine Roller or our Non-Fluffy Cloth.When using this product we recommend using Eye Protection and an Odour Respirator (for poorly vented areas) as well as protective gloves.For additional protection (after using Impregnator) on brick, slate and other natural stone inside floors apply HG Satin Gloss Polish (Golvpolish).For additional surface protection on Terracotta floor tiles apply HG Terracotta Shine Seal, HG Terracotta Wax - available in two colours or HG Terracotta Clear Paste Wax.Coverage: 8-10 m² per litre. 5 m² for 2 coats.